Infrared thermometers

The RayTemp ™ 38 is a professional infrared thermometer with dual laser dot alignment. The thermometer incorporates a 50:1 optic ratio (target distance/diameter ratio), this enables users to measure small targets from a distance. The user stands a safe and comfortable distance from the target, points the thermometer at the surface to be measured, pulls the trigger and instantly reads the temperature. Ideal for measuring the temperature of ceiling vents and hot pipes in the HVAC industry or any other item that is difficult to reach. This enables the user to measure most surfaces accurately and quickly.
The thermometer features a four-button keypad, allowing the user to select the mode required, i.e. max, min, differential and average temperatures, view the max/min high and low alarms and adjust the emissivity from 0.1 to 1.0 in 0.01 increments (default set at 0.95).

This infrared thermometer measures the surface temperature over the range of -60 to +1000°C with a 0.1°C (-9.9 to +199.9°C) or 1°C resolution

The RayTemp 38 is two instruments in one as itincorporates a thermocouple socket that will accept a type K thermocouple probe, Each RayTemp 38 is supplied in a FREE protective ABS carrying case.
specification:-
• Range -60 to +1000°C
• Resolution 0.1°C or °F (-9.9 to +199.9°C) otherwise 1°C
• Infrared accuracy ±2% of reading or ±2°C (whichever greater)Ffield of view target ratio 50:1
• Emissivity 0.95 default, 0.1 to 1.0 adjustable in increments
• Battery 2 x MN2400 (AAA)
• Battery life 180 hours continuous use
• Display custom LCD with backlight
• Dimensions 47 x 197 x 203mm
• Weight 386 grames

The RayTemp 3 infrared thermometer is compact, lightweight and easy to use. Simply aim, pull the trigger and display the temperature of the item being measured, in addition the LCD will display the maximum temperature. The RayTemp 3 measures temperature over the range of -60 to +500°C with an assured accuracy of +/-1°C over the range of 0 to +65°C outside of this range +/-2°C of reading in an ambient temperature of between +15°C and +25°C with a repeatability of +/-1°C of reading'.
The RayTemp 3 is ideal for measuring food surface temperature, eliminating the need to touch or contaminate the food you are measuring, avoiding the risk of cross-contamination. It can be used by anyone as there is no need to focus or adjust the instrument.
RayTemp 3 features a single push button, allowing the user to select °C or °F. The thermometer also incorporates laser assisted alignment as standard, to assist in pin-pointing the area of measurement. The unit incorporates an 11:1 optic ratio (target distance/diameter ratio) and a fixed emissivity of 0.97.

• Simple push button operation
• Assured accuracy of ±1°C over the range of 0 to +65°C
• Ideal instrument for the chilled & frozen foods

Specification:-
• Range -59.9 to +499.9°C
• Resolution 0.1°C or °F (-9.9 to +199.9°C) otherwise 1°C
• Infrared accuracy ±1°C (0 to +65°C) otherwise ±2°C
• Field of view target ratio 11:1
• Emissivity 0.97 fixed
• Battery 2 x MN2400 (AAA)
• Battery life 140 hours continuous use
• Display custom LCD
• Dimensions 39 x 72 x 175mm
• Weight 180 grams
This does not come with a calibration certificate, but kick the box below and for the price shown we will get one added to the unit, this will take around 10 days

People who bought this item also bought:

1. Fridge/ Freezer Bi-metal Thermometer (Ref: 102490 A2)

The TN2 is a non-contact infrared thermometer, possibly the smallest infrared thermometer with laser alignment on the market today, measuring only 18 x 50 x 100mm and weighing just 62 grams.
Simply aim the thermometer at the target and press the read button to display the surface temperature. The TN2 indicates temperature over the range of -33°C to +250°C with a resolution of 0.1°C.
The TN2 thermometer incorporates an optical lens that measures temperature by sensing the amount of radiated energy at infrared frequencies. Using this data and the actual temperature of the infrared sensor (thermopile), the TN2 can calculate the temperature of the surface that emitted the energy.
The distance to target ratio is 6:1 therefore the thermometer should be positioned as close to the target as practical. The TN2 infrared thermometer incorporates maximum, minimum and lock (continuous) functions and is switchable between °C and °F. The unit is supplied with a default emissivity of 0.95, however, the emissivity can be changed from 0.01 to 1.

Please note to use to balance radiators, Insulation tape on the pipe will be needed, as a shiny surafce will give inaccurate readings

The TN1 thermometer is a non-contact infrared thermometer, possibly the smallest infrared thermometer in the world today measuring only 18 x 37 x 68mm and weighing just 32 grams. Simply aim the thermometer at the target and press the measurement button to display the surface temperature. The TN1 indicates temperature over the range of -22 to +110°C with a resolution of 0.1°C.

The distance to target ratio is 1:1 therefore the thermometer should be positioned as close to the target as possible without the need to touch the surface being measured. The TN1 incorporates maximum, minimum and lock mode functions and is switchable between °C and °F, details of these features are overleaf.
The TN1 is supplied with a default emissivity of 0.95, however the emissivity can be changed from 0.01 to 1. Changes to the emissivity should only be carried out by experienced personnel.
Field Of View 1:1 Optics ratio
Response Time 1 Second
Range -22 to +110°C
Resolution 0.1°C or °F (Switchable)
Accuracy ±2% of Reading or ±2°C
Emissivity default at 0.95
Dimensions 18 x 37 x 68mm
Weight 32 grams

Functions:
• Display in ºC or ºF
• LCD display temperature
• Auto Data Hold
• Low battery indication
• Auto Power Off
• Backlight
• Reading Time: Less than 1 second
• Laser Pointer for accuracy

Specifications:
• Distance to spot size ratio 8:1
• Measuring Range: -50 ºC to 500 ºC
• Display Accuracy: ± (2.0% +2 ºC / 4º F)
• Display Resolution: 1 ºC / ºF
• Dimensions: 50(W)*90(D)*195(L)mm
• Display Size: 30(W)*22(H)mm
• Replaceable battery: PP3 9 Volt
Click here for a larger picture

Functions:
• LCD display temperature
• Easy to use: hold it within one foot of the area to be measured and push the button
• Back light illuminates display for taking measurements at night or in areas with low light levels
• Intergrated Torch
• Auto data hold when trigger released 7-8 seconds
• Auto power off
• Reading Time: Less than 1 second

Specifications:
• Distance to spotsize ratio 6:1
• Measuring Range: -30 ºC to 270 ºC / -22 ºF to 518 ºF
• Display Accuracy: ± (2.5% +2 ºC / 4 ºF)
• Display Resolution: 1 ºC/ ºF
• Dimensions: 60(W)*28(D)*95(L)mm
• Display Size: 25(W)*25(H)mm
• Replaceable battery: AAA
Click here for a larger picture

KM814FS Infra-red Food Thermometer,
Laser sighting to pinpoint target area
* Pocket sized and easy to use
* Fast safe surface temperature measurement
* Backlit LCD display
* Displays temperature in °C or °F
* Emissivity pre-set at 0.97, optimised for food use
* Hold function freezes displayed reading
* Ratio of Distance to spot size 4:1

Measurement Range, -30°C to +200°C, -25°F to +400°F
Temperature Display Resolution, 0.2°C or 0.5°F
Accuracy at +23°C/+73°F , For targets :-
below 0°C, ±1°C +0.1%
below +32°F, ±2°F +0.1%
0°C to +65°C, ±1°C
+32°F to +150°F, ±2°F
above +65°C, ±1.5% of reading
above +150°F, ±1.5% of reading
Repeatability, ±0.5% of reading or ±1°C/2°F, whichever is greater
Operating Temperature Range, 0°C to +50°C, +32°F to +122°F
Dimensions, L 101mm x W 38mm x H 152mm
Weight, 227gms/8oz
THIS DOES NOT COME WITH A CALIBRATION REPORT
1st Class Delivery average 2-5 working days
1 Year Guarantee

Laser sighting to pinpoint target area
* Pocket sized and easy to use
* Fast safe surface temperature measurement
* Backlit LCD display
* Displays temperature in °C or °F
* Emissivity pre-set at 0.95, suitable for most organic materials and
painted / Oxidised surfaces
* Hold function freezes displayed reading
* Ratio of Distance to spot size 6:1

Measurement Range, -18°C to +260°C, 0°F to + 500°F
Temperature Display Resolution, 0.2°C or 0.5°F
Accuracy at +23°C/+73°F , For targets :-
Below 0°C, ± 3°C
0°C to +260°C, ±2°C
Repeatability, ±2% of reading or ±2°C/3°F, whichever is greater
Operating Temperature Range, 0°C to +50°C, +32°F to +122°F
Dimensions, L 101mm x W 38mm x H 152mm
Weight, 227gms/8oz
THIS DOES NOT COME WITH A CALIBRATION REPORT